Unpack all components carefully. Please check to If you have any questions and/or problems, please ensure
all parts have been removed from the contact the retail store you purchased this fountain. packaging. *Some
splashing may occur when the • If your pump fails to run
product is in use.
• Check the circuit breaker or try a different
1. Place the Fountain Base on a smooth & level outlet to make sure the pump is receiving surface. Allow enough
space to access the pump. electrical power.
• Check the pump discharge and tubing for any kinks and/or
obstructions
• Any buildup obstructing the water flow can be flushed with a
garden hose
• Check the rotor by removing the front cover & plate to access the
impeller area. Turn the rotor and make sure that the rotor is not jammed
or broken
• If your pump “spews”
2. Remove the pump from its packaging and adjust • Check the water level to make sure the the flow control to
the lowest setting to avoid pump is completely submerged and there is
splashing until the fountain is completely enough water in the basin to operate your
assembled. fountain. Not having enough water will
cause your pump to spew
To Next Page
Loading...
