Alpine INE-NAV-30 - Entering an Address (Canada)

26
Tip!
If you know that you will use this destination
frequently, before tapping
to confirm the destination, put i
t in the Address Book first: tap
then
, give a name for the new entry, and tap
to save the location. The map with the destination returns
automatically. Now you can start your journey.
3.1.1.2 Entering an address (Canada)
To enter an address as the destination, do as follows:
1. In the Navigation menu, tap the following buttons: , .
2. By default, the software proposes the country, state and city/town where you are. If needed, tap
, enter the first few letters of the destination country or state on the keyboard,
and select one from the list. If you select a country without a state, you can search for a city/town in
all its states.
3. If needed, select a new city/town:
a. Tap .
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:
• The most likely city/town name is always shown in the input field. To accept it, tap
.