52
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate. Do as follows:
1. In the Navigation menu, tap .
2. Open the menu and tap .
3. You can enter the latitude and longitude values in any of the following formats: decimal degrees;
degrees and decimal minutes; or degrees, minutes and decimal seconds.
4. (optional) If necessary, tap then and enter the coordinate
in UTM format.
5. When finished, tap .
6. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap
to confirm the destination, or tap to select a different
destination.
7. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap to modify route parameters, or tap
and start your journey.
To Next Page
Loading...
