Alpine INE-NAV-30 - User Registration

Owner's manual
User Registrat ion
User Registration
You can register up to two users. Configure the User 1 and User 2 settings for each user.
1 Press the* (My Favorites) button.
The My Favorites screen is displayed.
2 Touch [Start].
My Favo..rites
Did you know ttiS \lit wpports mitiple usen?
H rernembera each lnctvldual uaer'a
radi o 11aton l)r8Mia. SCUld pre~..,_, lhoric:ull ~
and rru:h morel
Pr.a 'Siarl' ID
The user name input screen for the first user is
displayed.
• Touching
[Skip] registers the user name as
"USER 1" or "USER 2" and no BLUETOOTH device
is registered. In this case, the users will not be
switched automatically.
• Touching
[Cancel] or pressing the * (My
Favorites) button returns to the original screen
without registering a user.
3 Input the user name from the keypad and
touch [OK].
The BLUETOOTH Device Setup screen is displayed.
•
Touch l +- J to edit the name.
4 Touch [Link], then touch [OK].
6-EN
The BLUETOOTH Device List is displ ayed.
• Touching [Do not Link] exits user registration
without registering a
BLUETOOTH device.
s Touch [Search].
The system starts search ing for BLUETOOTH
devices.
When the search is completed, the BLUETOOTH
Device List is displayed.
•
Set the BLUETOOTH setting on the preregistered
BLUETOOTH device side to " ON:'
6 Touch a registered BLUETOOTH device and
touch [OK].
My Favorites sc r een for USERl is displ ayed.
• Register User 2
7 Press the* (My Favorites) button.
The My Favorites screen is ex ited and the display
returns to the original
screen.
8 Press and hold the* (My Favorites) button
for at least 3 seconds.
The My Favorites user guide is displayed. Repeat
steps 2 through 6 to register USER2.