Alpine INE-NAV-30 - Selecting a City;Town Center as the Destination

35
3.1.1.7 Selecting a city/town center as the destination
The city/town center is not the geometric center of the city/town but an arbitrary point the map creators
have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of
the important intersections.
1. In the Navigation menu, tap the following buttons: , .
2. Select the country and state as described earlier (page 24).
3. Select the destination city/town:
a. Tap .
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:
• The most likely city/town name is always shown in the input field. To accept it, tap
.
• If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
automatically, tap ). Select the city/town from the list.
4. Instead of entering the street name, tap . This way the center of the displayed
city/town becomes the destination of the route.
5. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap