Alpine INE-NAV-30 - Page 192

77
• Maneuver restrictions and directional constraints are taken into account when planning a
route.
• Roads are used only if access for buses is allowed.
• Private roads, resident-only roads and walkways are excluded from routes.
• :
• Maneuver restrictions and directional constraints are taken into account when planning a
route.
• Roads are used only if access for taxis is allowed.
• Private roads, resident-only roads and walkways are excluded from routes.
Route Planning Method types:
Button
Description
Gives a quick route if you can travel at or near the speed limit
on all roads. Usually
the best selection for fast and normal cars.
Gives a short route to minimize
the distance to travel. It can be practical for slow
vehicles. Searching for a short route regardless of the speed, this route type is
rarely practical for normal vehicles.
Gives a quick but fuel efficient route based on the fuel consumption data given in
Route settings (page 74). Travel cost and CO
2
emission calculations are
estimations only. They cannot take elevations, curves and traffic conditions into
account.
Results in a route with fewer turns and no difficult maneuver
s. With this option, you
can make your software to take, for example, the freeway
instead of a series of
smaller roads or streets.