EasyManua.ls Logo

Alpine iXA-W404E - TUE-T150 DV Operation (Optional); Operating the TUE-T150 DV (Optional)

Alpine iXA-W404E
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42-EN
01GB06iXA-W404E.fm
ALPINE iXA-W404E 68-14470Z14-A (EN)
Operating the TUE-T150DV (Optional)
Operable when optional TUE-T150DV is connected.
When DVB-T is selected in “Adjusting the AUX name Mode”
(page 19), the source is displayed in AUX selection screen.
1
Press SOURCE to activate mode switching
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you slide the display, the mode switches
circularly in the following order:
Audio/Visual Navigation Camera Telephone
Multi Info Audio/Visual
3
Slide the display vertically with your finger, or press
SOURCE repeatedly to select DVB-T source.
4
Press /ENTER.
The DVB-T source is activated and the display changes to
the DVB-T main screen.
5
Perform the desired operation.
Channel Number Up/Down or Favourite Channel Number
Up/Down
Touch [CH.]*
to select changing the Channel or the
Favourite Channel.
Touch CH. [] or [] to move the Channel number Up/Down.
Touch FAV [] or [] to move the Favourite Channel number
Up/Down.
* The button displays the current changing mode ([CH.] or [FAV]).
Calling up Main Menu Screen
Touch [MENU] to call up the main menu screen.
Calling up Menu Operation Mode
1
Touch [P1/2].
The function guide appears.
2
Touch [MENU CONT] to call up the menu operation
mode.
Switching the Source
Touch [BAND].
The source switches with each touch.
Calling up Electronic Programme Guide (EPG)
Touch [EPG] to call up the Electronic Programme Guide.
Scanning Mode
1
Touch [P1/2].
The function guide appears.
2
Touch [A.MEMO] to start the auto scan procedure.
For detail, refer to the Owner’s Manual of the TUE-T150DV sold
separately.
Switching the Video Input Type
1
Touch [P1/2].
The function guide appears.
2
Touch [NTSC/PAL].
The video input type switches with each touch.
Video Menu Operation of TUE-T150DV
1
Touch [P1/2].
The function guide appears.
2
Touch [].
The direct touch mode screen is displayed.
When the optional TUE-T150DV is connected, you can control it by
the touch key (except the [Control] key) on the display screen of the
unit.
3
Touch [Control].
Return to DVB-T main screen.
If no operation is performed for 5seconds,the screen will
automatically switch to the full screen mode.
TUE-T150DV
Operation
(Optional)
01GB00iXA-W404E.book Page 42 Tuesday, March 3, 2009 5:01 PM

Table of Contents

Related product manuals