43-EN
01GB06iXA-W404E.fm
ALPINE iXA-W404E 68-14470Z14-A (EN)
An optional CD Changer may be connected to the iXA-W404E if it is
Ai-NET compatible. With a CD Changer connected to the Ai-NET
input of the iXA-W404E, the CD Changer will be controllable from the
iXA-W404E.
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on the
iXA-W404E.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by the iXA-W404E.
See the Multi-Changer Selection section for selecting the CD Changers
(explained on page 43).
Playback
1
Press SOURCE to activate mode switching
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you slide the display, the mode switches
circularly in the following order:
Audio/Visual Navigation Camera Telephone
Multi Info Audio/Visual
3
Slide the display vertically with your finger, or press
SOURCE repeatedly to select CD CHG. source.
4
Press /ENTER.
The CD CHG. source is activated and the display changes
to the CD CHG. main screen.
• The source name in the display changes from CD CHG. to USB when
“Setting the USB Adapter to ON/OFF” (page 20) is set to ON.
5
Touch [] or [] to select the desired track
(file).
Returning to the beginning of the current track (file):
Touch [].
Fast backward:
Touch and hold [].
Advancing to the beginning of the next track (file):
Touch [].
Fast forward:
Touch and hold [].
6
To pause playback, touch [].
Touching [] again will resume playback.
Selecting a Disc (Changer) (Optional)
When a Disc CD Changer is connected:
Touch DISC [] or [] or press BAND to select the
desired DISC.
When an MP3 compatible CD changer is connected:
1
Touch [P1/2] to change the Function Guide display.
2
Touch DISC [] or [] or press BAND to select the
desired DISC.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the iXA-W404E as
well as the CD changer.
• For operation of the connected DVD changer (DHA-S690), refer to
the Owner’s Manual of DHA-S690.
• When the optional DVD changer (DHA-S690) is connected to this
unit, touching [NTSC/PAL] after touching [P1/4] three times will
change the video input.
Multi-Changer Selection (Optional)
When using KCA-410C (Versatile Link Terminal), you can connect two
changers.
In changer mode, touch [CHG SEL] to select the next
changer (connected changers only).
Select the desired Folder (Folder up/
down) (MP3 Changer mode)
If you listen to an MP3 file from a selected folder, the folder can be
changed.
Touch FOLDER [] or [] to select the folder.
The first file in the selected folder is played back.
Repeat Play
Touch [] repeatedly to select the Repeat Playback
mode.
The file will be played repeatedly.
*
1
When an MP3 compatible CD changer is connected.
• To cancel, select off in the above procedure.
• When set Repeat to off, turns to grey.
• If Repeat Disc is set to ON during M.I.X. One play in CD changer
mode, M.I.X. will apply to the current disc only.
Changer
(Optional)
Repeat One : Only a file is repeatedly played back.
Folder *
1
: Only files in a folder are repeatedly
played back.
Disc
: A disc is repeatedly played back.
off : Repeat mode is turned off.
01GB00iXA-W404E.book Page 43 Tuesday, March 3, 2009 5:01 PM
To Next Page
Loading...
