Alpine MDA-5048 - Specifications

English EspañolFrançais
60
Specifications
English
MD SECTION
Signal-to-Noise Ratio ...................................................................... 90 dB
Channel Separation ....................................................... 85 dB (at 1 kHz)
Wow & Flutter (% RMS) ................................... Below measurable limits
EQUALIZER SECTION
Number of Bands ................................................................................... 7
Equalizer Centre Frequency Range ..... 63/160/400 Hz/1/2.5/6.3/16 kHz,
±12 dB for each range
GENERAL
Power Requirement ................................14.4V DC (11 – 16V allowable)
Frequency Response (+0, –1 dB) ................................... 10 Hz – 50 kHz
Signal-to-Noise Ratio ...................................................................... 95 dB
Weight ...................................................................... 1.3 kg (2 lbs. 13 oz)
CHASSIS SIZE
Width .................................................................................... 178 mm (7")
Height..................................................................................... 50 mm (2")
Depth ............................................................................. 147 mm (5-3/4")
Note: Due to product improvement, specifications and design are
subject to change without notice.