Alpine PXE-R600 - Technical Parameter; Specification Parameter; Function Parameter

Dynamic range ≥100dB
Signal to noise ratio (RCA) ≥100dB
Ground noise High level: 90.96uVrms; RCA: 7.66uVrms
Channel resolution ≥80dB
Total harmonic distortion ≤0.01%
Input voltage High level: 32Vpp; RCA: 8Vpp
Output voltage 9Vpp
Rated power 8CH×25W (4Ω,14.4V,1kHz,10%THD)
Maximum power 8CH×50W (4Ω,14.4V,1kHz,10%THD)
AUX input/output sensitivity (RCA) 1:1.125 (no power amplication)
Frequency response 20Hz~20kHz
System sampling rate 48kHz/24bit
Input impedance High level: 240Ω; RCA: 20kΩ
Output impedance 51Ω
Working voltage 9~16V
Quiescent current ≤2.3mA (o󰀨 state)
Standby power consumption ≤0.1W
REM startup input High level (H1-/H1+), ACC optional
REM startup output 12V (0.2A)
Boot time 10s
Ambient temperature -20~60℃
Storage temperature -40~85℃
Gross weight 1.53kg
Size of host 92.5mmx48.1mmx24mm210mm×190mm×45mm
Size of wire controller 92.5mmx48.1mmx24mm
Input signal 6-channel high level, 2-channel RCA audio, HD Bluetooth
Output signal 8-channel high level, 8-channel RCA audio
Output channel signal gain Range: mute, -60dB ~ +6dB
Output signal equalizer
Type: PEQ and GEQ
Frequency: 20Hz ~ 20kHz, resolution: 1Hz
Q value (slope or gradient): 0.404 ~ 28.852
Gain: -12.0dB ~ +12.0dB, resolution: 0.1dB
Output signal frequency divider
Each output channel is equipped with a multi-level high-low pass independent lter
Filter type: Linkwitz-Riley, Bessel, Butterworth
Filter crossover frequency: 20Hz~20kHz, resolution 1Hz
Filtering slope (gradient) : 6dB/Oct~48dB/Oct
Output phase position Positive or opposed phase (+/-)
Output delay 0.000~8.000ms, 0~277cm, 0~109inch
PRESET sound e󰀨ect The device can save 6 sets of preset sound e󰀨ect data
14
Specication Parameter
Function Parameter