Alpine PXE-R600 - Mobile Phone App - Advanced Tuning; EQ Interfaces (GEQ;PEQ)

6
The channel EQ has two interfaces: graphic equalizer
(GEQ) and parametric equalizer (PEQ).
There are 31 segments of EQ for adjustment. Drag
the fader up and down or click the gain value, drag
the fader left and right or click the "+" or "-" buttons
to adjust the gain in the pop-up gain adjustment box;
Click the Q value, drag the slider left and right or click
the "+" and "-" buttons to adjust the Q value in the pop-
up Q value adjustment box; Click the frequency value,
drag the fader left and right or click the "+" and "-"
buttons to adjust the frequency in the pop-up frequency
adjustment box.
1. Adjustment range of frequency: 20Hz~20kHz;
2. Adjustment range of Q value: 0.404~28.852;
3. Adjustment range of gain: -12.0dB~+12.0dB.
When adjusting EQ, the Straight Equalization
button [ ] will show up. Click "Straight Equalization"
to make all equalizers of the current channel inactive;
Click the Restore Equalization button [ ] to make
all equalizers of the current channel return to the
previous startup state. Click the Reset Equalization
button [ ], and the parameters of all equalizers
of the current channel return to their initial state: input
Q value is 2.515, output Q value is 2.201, and gain is
0.0dB.
Click the PEQ button [ ] to switch "GEQ" to
"PEQ", and click the GEQ button [ ] to switch
"PEQ" to "GEQ".
* The gain is adjustable at the GEQ interface, and
the frequency and Q value are xed, while the
frequency, Q value and gain are all adjustable at
the PEQ interface.
Frequency Combination
Interface
PEQ InterfaceGEQ Interface
On the frequency combination interface, the volume
of each sound source inside the channel can be
adjusted by dragging the fader or click the "+" and "-"
buttons to achieve audio mixing and frequency mixing.
* For details, please refer to the "Introduction
for Frequency Combination Settings" in the
Instructions for the computer software.