Alpine PXE-R600 - Computer Software - Installation; Software System Requirements; Main Software Interface Overview

7
Instructions for the Computer Software
After installing the PXE-R600 software, you can tune and set parameters of the PXE-R600 device on your
computer.
* This function is applicable for manufacturers and dealers only.
Notes for Software Installation
• The software can only be used with Microsoft® Windows® operating system.
Operating system: WindowsXP, WindowsVista, Windows7, Windows8, Windows10
CPU: 1.6GHz or higher
Memory card: 1GB or higher
Hard disk: 512MB or more available space
Computer screen resolution: 1280*768 or higher
• Please install the PXE-R600 computer software properly rst before connecting the PXE-R600 device to your
computer.
Main Interface
Open the PXE-R600 computer software, enter the boot screen rst, and then enter the main tuning interface.
Boot Screen