Do you have a question about the Alpine S-A55V and is the answer not in the manual?
Amplifier class | D |
---|---|
High pass filter | Yes |
High pass filter range | 50 - 400 Hz |
RMS output power (max) | 1100 W |
Signal-to-Noise Ratio (SNR) | 98 dB |
Number of amplifier channels | 5 channels |
Total Harmonic Distortion (THD) | 1 % |
RMS power output per channel (2 Ohm) | 60 W |
RMS power output per channel (4 Ohm) | 40 W |
Maximum power output per channel (4 Ohm) | 200 W |
Audio RCA inputs | 6 |
Product color | Black |
Weight | 2900 g |
---|
Key safety warnings and operational prohibitions for safe use.
Specific advice on avoiding driving distractions and maintaining auditory awareness.
FCC compliance, serial number recording, and warranty service information.
Connect speaker cables to output terminals.
Adjusts the frequency for LP and HP filters.
Illustrates the basic connection for the S-A60M amplifier.
Wire size selection based on fuse capacity and length.
Details on connecting power supply wires correctly.