
Do you have a question about the Alpine S-A32F and is the answer not in the manual?
| Channels | 4 |
|---|---|
| Crossover Slope | 12 dB/octave |
| RMS Power Output (2 Ohms) | 75W x 4 |
| Bridged Power Output (4 Ohms) | 150W x 2 |
| Frequency Response | 10Hz - 30kHz |
| Signal-to-Noise Ratio | >100dB |
| S/N Ratio | >100dB |
| Input Sensitivity | 0.2V - 4V |
| Crossover Frequency | 50Hz - 200Hz |
| Bass EQ | 0 to +12dB |
Essential safety instructions for operating the amplifier, including volume, attention, and environmental considerations.
Visual guide to connecting the S-A60M amplifier's power, ground, and audio input/output terminals.
Visual guide to connecting the S-A32F amplifier's power, ground, and audio input/output terminals.
Diagram illustrating the connection points for the S-A55V amplifier.
Explanation of how to connect speaker outputs, RCA inputs, and pre-out jacks.
Instructions for connecting the battery lead, ground lead, and remote turn-on lead.
How to set the speaker input level and adjust amplifier gain for optimal sound output.
Chart to determine the correct wire size based on fuse capacity and wire length for power supply.
Detailed specifications for power output, THD+N, S/N ratio, and frequency response.
Specifications for input sensitivity, crossover, equalizer, dimensions, and weight.
Technical specifications covering output power, THD+N, S/N ratio, and frequency response.
Specifications for the S-A55V, including power output for channels and subwoofer.
Loading...