Alpine S-A32F User Manual

■ S-ASSV
Performance
Per Channel, Ref.: 4 0, 14.4 V
Power Output
Per Channel, Ref.: 2 0, 14.4 V
Bridged, Ref.: 4 0, 14.4 V
Ref.: 10 W into 4 0
Ref.: 10 W into 2 0
THD+N
Ref.: Rated Power into 4 0
Ref. : Rated Power into 2 0
IHF A-wtd + AES-17
Ref.: 1Winto40
S/N Ratio
IHF A-wtd + AES-17
Ref.: Rated Power into 4 0
+0/-3 dB, Ref.: 1Winto40
Frequency Response
+0/-1 dB, Ref.: 1 W into 4 0
Damping Factor Ref.: 10 W into 4 0 at 100 Hz
Control
Input Select
Selectable Input Signal
Configuration (2ch/4ch Input)
Input Sensitivity
RCA Input
Ref.: Rated Power into 4 0
Crossover
Variable HPF / LPF
Remote Level*
Linear Attenuation
General
Input Impedance
Width
Dimensions Height
Depth
Weight
* Requires optional RUX-KNOB.2.
NOTE:
.
CH-1/2/3/4 SUBWOOFER
40WRMS x 4 200W RMS x 1
60W RMS x 4 300W RMS x 1
120W RMS x 2
-
s0.03% s0.03%
S O.OS %
S O.OS %
s0.07%
s0.07%
s0. 1% s 0.1 %
>83 dB >8 3 dB
> 98dB
> 98dB
50 Hz - 30 kHz
10 Hz-400 Hz
60 Hz - 20 kHz
20 Hz- 300 Hz
>100 >750
CH-3/4:
CH - 1+2+3+4
CH-1 /2 or CH-3/4 or SUB
Hi: 0.5 - 10 V Hi: 0.5 - lOV
Lo: 0.2 - 4.0 V
Lo: 0.2 - 4.0 V
HPF: 50 Hz - 400 Hz LPF: 50 Hz - 400 Hz
(-12 dB /oct.)
(-24 dB/ oct .)
-
0 to - 20dB
>10 kO
286 mm (11-3/8")
57.5 mm (2-3/8")
204 mm (8-1 /8")
2.9 kg (6 lb 6 oz)
• Specifications and design are subject to change without notice.
22 -EN

Alpine S-A32F Specifications

General

Brand	Alpine
Model	S-A32F
Category	Amplifier
Language	English