Alpine S-A55V User Manual

About Power Indicator
I
\
0
oJ
c
2
2
C
~
j
re
I
IC
c:::. ==i
I
~
-
0 o)
\
I
Power Indicator
Lights up when power is on.
Is off when power is off.
Indication color
Status
Blue Amplifier circuit is normal.
Red Operating temperature is
(blinking)
high.
Red Amplifier circuit is abnormal.
An electrical short has
occurred, or supply current is
too high.
Operating temperature is too
high.
Power supply voltage is too
high.
Solution
Turn down the volume of the head unit (input
signal).
Decrease the vehicle's interior temperature to a
normal level.
The indicator color changes to blue.
Turn off the power supply and eliminate the cause.
Then turn on the unit and verify that the indicator
col or has changed to blue.
If it remains red, turn off the unit and consult your
dealer.
Decrease the vehicle's interior temperature to a
normal level.
The indicator color changes to blue.
Use the correct power supply voltage.
The indicator color changes to blue.
11 -EN

Alpine S-A55V Specifications

General

Amplifier class	D
High pass filter	Yes
High pass filter range	50 - 400 Hz
RMS output power (max)	1100 W
Signal-to-Noise Ratio (SNR)	98 dB
Number of amplifier channels	5 channels
Total Harmonic Distortion (THD)	1 %
RMS power output per channel (2 Ohm)	60 W
RMS power output per channel (4 Ohm)	40 W
Maximum power output per channel (4 Ohm)	200 W
Audio RCA inputs	6
Product color	Black

Weight and Dimensions

Weight	2900 g