4
ASSEMBLING & USING YOUR PRODUCT
Unpack all components carefully. Check the packaging to ensure all of
the parts have been removed.
*Some splashing may occur when the fountain is in use.
1. Attach the Small Bucket to the Large Panel of the fountain base
by attaching the Screws through provided holes on the bottom of
the Large Panel and mounting holes on the bottom of the Small
Bucket
1. Remove the pump from its packaging and adjust the ow control
to the lowest setting to avoid splashing until the fountain is
completely assembled.
Alpine Quick Tip #1
Switch to the Left to turn
up the water ow. Turn the
switch to the Right to turn
down the water ow.
To Next Page
Loading...
