Alpine TZL199 - Fountain Troubleshooting; If Your Pump Fails to Run; If Your Pump Spews; If Your Pump Makes Abnormal, Loud Noises

10
REPLACEMENT PARTS
REPLACEMENT PARTS
For parts or additional help with your new product, please contact
Alpine Customer Service.
FOUNTAIN TROUBLESHOOTING
If you have any questions or problems, please contact the retail store
where you purchased this fountain.
If Your Pump Fails to Run
1. Check the circuit breaker or try a different outlet to make sure the
pump is receiving electrical power.
2. Check the pump discharge and tubing for any kinks and/or
obstructions.
3. Any buildup obstructing the water ow can be ushed with a
garden hose.
4. Check the rotor by removing the front cover and plate to access
the impeller area. Turn the rotor and make sure that the rotor is not
jammed or broken.
If Your Pump “Spews”
• Check the water level to make sure the pump is completely
submerged and there is enough water in the basin to operate your
fountain. Not having enough water will cause your pump to spew.
If Your Pump Makes Abnormal, Loud Noises
1. Disconnect the pump from the electrical power supply and remove
the front cover and plate.
2. Carefully grip the impeller and gently pull the impeller/rotor
assembly out of the pump housing.
3. Rinse the impeller/rotor assembly and clean the cavity with clean
water. If breakage or damage is found, contact your local retailer
for parts.