HYC200 – Installation and Maintenance Manual
Version 1-1
1 Important safety instructions for installation and maintenance
All rights reserved. Reproduction of this document, even in part, is only permitted with the approval of Alpitronic Srl.
1. Important safety instructions for installation and maintenance
KEEP THESE INSTRUCTIONS
This chapter contains all safety instructions that must be observed when installing and
maintaining the HYC200. Improper operation due to non-observance of this installation and
maintenance manual can result in death, serious injuries or significant property damage.
These safety instructions must be read carefully before installing, operating and maintaining
the device.
Symbol descriptions:
WARNING
This symbol indicates potential hazards that can result in severe injury or
death if not properly followed.
RISK OF ELECTRIC SHOCK
Highlights the potential for electric shock if precautions are not taken.
WARNING OF HOT SURFACES
Indicates areas or parts that can become hot during operation and may
cause burns upon contact.
WARNING OF HEAVY WEIGHTS
This symbol indicates components or devices that are heavy and can
cause injuries if handled carelessly.
RISK OF CRUSHING
This symbol indicates potential crushing hazards, particularly when
installing or transporting equipment.
To Next Page
