Alstom SF6 User Manual

GRID
High Voltage Switchgear
PS 0002EN
03 1996-03-18 2011-03-21 2 / 3
Sheet N° Revision 1st issue Revision date Page
SAFETY INSTRUCTIONS
PACKING
TRANSPORT
INSTALLATION
START-UP
OPERATION
MAINTENANCE
SCRAPPING &
RECYCLING
Handling operations must be carried out by personnel
familiar with the basic handling regulations.
X X X X X X X
Personnel must be qualified to operate lifting
equipment, cranes, overhead conveyors, etc..
X X X X X X X
Equipment in proper working order :
- Equipment must be checked and maintained
regularly in accordance with local regulations.
- All equipment must be properly housed.
X X X X X X X
Familiarity with the load to be handled (see details on
the case).
X X X X X X X
Use of the appropriate handling equipment :
- Type of sling(s),
- Correct slinging methods,
- Use of special ALSTOM handling equipment.
X X X X X X X
Follow the handling instructions on :
- the cases (pictorial symbols: centre of gravity,
slinging points, etc.),
- the assembly instructions.
X X X
Compliance with the relevant work station safety
instructions (proximity of electrical equipment).
X X X X X X
Operator Safety :
- use of gloves, helmets, safety boots, etc.,
- loads not to be carried with personnel underneath.
X X X X X X X

Alstom SF6 Specifications

General

Brand	Alstom
Model	SF6
Category	Circuit breakers
Language	English