Installation
Tightening torque values
P31--0001EN/02
2/4
01--2011
© ALSTOM 2010. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is
strictly prohibited.
GRID
Greasing th e fasteners before tigh t en in g
Choice of product
to be used
The following table indicates the product to be used for the fasteners
before tightening according to the type of assembly :
If assembly ... Product to be used...
current
MOBILPLEX 47
MOBILUX EP3
electrical connections CONTACTAL HPG
with seals and gaskets
Removable? Product...
YES MOLYKOTE 111
NO LOCTITE 225
Where to apply
the product?
The following table indicates the part of the fasteners to treat with the
product before tightening according to the type of assembly :
If assembly ... With screws With bolts
current
electrical connections
Threads or bores
Threads or bores
with seals and gaskets
To Next Page
Loading...
Need help?
General
