Commissioning
Inspection prior to commissioning
P34--0001EN/03
3/6
07--2012
© ALSTOM 2010. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is
strictly prohibited.
GRID
Operating mechanism
Measurements
Reading the motor power supply voltage at the operating mechanism ter-
minals.
Check
The normal opperation of the following devices must be checked :
-- heating,
-- connections to the terminals (no excessive tightening).
To Next Page
Loading...
Need help?
General
