19 (48)
COOL MODE
Cool mode is used for cooling and dehumidify the room. In this mode the exhaust hose needs to be attached.
Så här ställer du in läget:
1. Press
a number of times until the symbol appears next to the symbol.
2. Select the target temperature between 18 – 32 °C by pressing or until the corresponding value is displayed.
3. Select the required fan speed by pressing
. Four speeds are available: High /Medium/ Low / Auto.
.
The most suitable temperature for the room during the summer varies from 24 to 27 °C. You are recommended, however,
not to set a temperature much below the outdoor temperature. The fan speed difference is more noticeable when the AC
is under Fan mode but may not be noticeable under Cool mode.
FAN MODE
In Fan mode the exhaust hose does not need to be attached.
1. Press
a number of times until the symbol appears next to the symbol.
2. Select the required fan speed by pressing . Four speeds are available: High /Medium/
Low / Auto.
DRY MODE
Dry mode is used for dehumidifying the room. In this mode the exhaust hose needs to be attached.
1. Press a number of times until the symbol appears next to the symbol. The display
on the AC shows . Note: In this mode, fan speed is selected automatically by the AC and
can not be set manually.
AUTO MODE
Auto mode is used for the AC to automatically choose to operate in Cool mode or Fan mode.
To set this mode:
1. Press
a number of times until the symbol appears next to the symbol. The display
shows .
2. Select the required fan speed by pressing
. Four speeds are available: High / Medium /
Low / Auto.
The AC is operating in Fan mode when the temperature is under 23 °C and operating in Cool mode when the temperature
is over 23 °C.
Display on the control panel:
The AC is in Auto mode when the display will be running circulating.
To Next Page
Loading...
Need help?
General