What causes PCB over temperature in Alto-Shaam Oven?
PCB over temperature in your Alto-Shaam oven means the PCB board temperature sensor is over 70° C. This can be caused by: 1. Cooling fan not operating. 2. Installation clearance requirements not met.
What does it mean when the Alto-Shaam 1200-SK Oven cavity probe is shorted?
If the cavity probe is shorted in your Alto-Shaam oven, it means a short circuit has been detected on the sensor wires, and this will halt any active program. The issue may be with the sensor connection, the sensor itself, or the control board.
What does it mean when the Alto-Shaam Oven cavity probe is open?
If the cavity probe is open in your Alto-Shaam oven, it indicates an open circuit has been detected on the sensor wires, which will stop any active program. Check the sensor connection, the sensor itself, and the control board.
What to do for Probe 1 short circuit in Alto-Shaam Oven upper compartment?
If your Alto-Shaam oven displays a 'Probe 1 short circuit, upper compartment' error, it means a short circuit has been detected on the sensor wires. Check the sensor connection circuit in the upper compartment, the sensor compartment itself, and the control board.
What to do for Probe 1 open circuit in Alto-Shaam 1200-SK upper compartment?
If your Alto-Shaam oven displays a 'Probe 1 open circuit, upper compartment' error, it means an open circuit has been detected on the sensor wires. Inspect the sensor connection circuit in the upper compartment, the sensor compartment itself, and the control board.
What to do for Probe 1 short circuit in Alto-Shaam 1200-SK Oven lower compartment?
If your Alto-Shaam oven displays a 'Probe 1 short circuit, lower compartment' error, it indicates a short circuit has been detected on the sensor wires. Check the sensor connection circuit in the lower compartment, the sensor compartment itself, and the control board.
Why is my Alto-Shaam oven overheating?
If your Alto-Shaam oven is showing a 'Unit over temperature' error, it means the cavity sensor has registered an over temperature condition for too long. The possible causes are: 1. Cooling fan not operating 2. Installation clearance requirements not met
What does bootloader error mean on Alto-Shaam Oven?
A bootloader error on your Alto-Shaam oven indicates a bootloader chip error. To resolve this, a power cycle is required to reset the EEPROM RAM.
What does PCB shorted mean on Alto-Shaam Oven?
If your Alto-Shaam oven displays 'PCB shorted', the PCB board temperature sensor is short-circuited, indicating a board failure.
What does PCB open mean on Alto-Shaam 1200-SK Oven?
If your Alto-Shaam oven displays 'PCB open', the PCB board temperature sensor is open-circuit, indicating a board failure.
General| Brand | Alto-Shaam |
|---|---|
| Model | 1200-SK |
| Category | Oven |
| Language | English |
To Next Page
