#8311 O&C MANUAL• TH/III FAMILY
PG. 2
SECTION 1 INSTALLATION SECTION 1
Stacking Mounting Instructions
No. 16222 or 16237 Kit
Using Stacking Platform from
Kit #16222 or 16237
to provide carving shelf:
1. Remove the three screws in the top plate at the front of
the cabinet.
2. Remove the three screws in the back plate near the top
of the cabinet.
3. Position the stacking platform on top of the unit with
the flange in front, aligning the holes in the platform
over the holes in the cabinet.
4. Reinstall the cabinet screws removed in steps 1 and 2
through the platform holes to attach it to the cabinet,
front and back.
5. Place the carvery shelf on the stacking platform.
for stacking carving shelf
Step 1
Step 2
Stacking Configurations
Configuration Stacking Assembly
1000-TH/III OVER 1000-TH/III • 1000-TH/III OVER 1000-S
750-TH/III
OVER 750-TH/III • 750-TH/III OVER 767-SK/III 5000811
500-TH/III
OVER 500-TH/III • 500-TH/III OVER 500-S
1000-S
OVER 100-TH/III
750-TH/III
OVER OR UNDER 750-S 5001359
500-S
OVER 500-TH/III
TM
OVER 500-S or 500-TH/III 16237
BCS
OVER 750-S or 750-TH/III 16222
or 750-TH/III
500-TH/III
To Next Page
Loading...
