COMBITOUCH™ ES SERIES • ELECTRIC INSTALLATION MANUAL • 23.
M O B I L E E Q U I P M E N T R E S T R A I N T
I N S T A L L A T I O N
Any appliance that is not furnished with a
p
ower supply cord but includes a set of casters
must be installed with a tether. Adequate means
must be provided to limit the movement of this
appliance without depending on or transmitting
stress to the electrical conduit. The following
requirements apply:
1.
Casters must be a maximum height of 6" (152mm).
2. Two of the casters must be the locking type.
3. Such mobile appliances or appliances on
mobile stands must be installed with the use
of a flexible connector secured to the
building structure.
A mounting connector for a restraining device is
l
ocated on the lower back flange of the appliance
chassis or on an oven stand, approximately
18" (457mm) from the floor. A flexible connector is
not supplied by nor is it available from the factory.
To Next Page
Loading...
Need help?
General
