6
3. QUICK START
3.1 Please check the AC Voltage available in your country before connecting your PM-12 to the AC socket.
3.2 Be sure that the main power switch is turned off before connecting the Mixer to the AC socket. Also, you should
make sure that all Input and output controls are turned down. This will avoid damages to your speakers and avoid
excessive noise.
3.3 Please connect one side of the speaker cable to speakon or phone jacks of your PM-12 and the other side to
the input socket of your speaker cabinet; or connect one side to the main output L/R of your PM-12 and other
side to the input socket of your active speaker cabinet or other stereo power amplifier.
3.4 Complete all other connections as illustrated.
3.5 When no external power amplifier or active speaker connected to the main output L/R of your PM-12, please
switch on your PM-12 after turning on all external devices; after using, switch off your PM-12 before all external
devices.
3.6 When the external power amplifier or active speaker connected to the main output L/R of your PM-12, please
switch on your PM-12 before the external power amplifier or active speaker. After using, switch off your PM-12
after the external power amplifier or active speaker.
3.7 Before disconnecting the PM-12 always turn-off the Power switch.
3.8 Do not use solvents to clean your PM-12. A dry and clean cloth will be OK.
To Next Page
Loading...
Need help?
General
