Alula BAT-Connect User Manual

Verify proper enrollment and operation using your control panel’s installation manual.
I
N
S
T
A
L
L
G
U
I
D
E
I
BAT-Connect Communicator
Connect Family
BAT-Connect is a device that connects to security
panels and provides interactive services, home
automation, and the ability to update the user
interface.
Features
• Three network connectivity paths: cellular, ethernet,
and Wi-Fi
• Provides interactive services, home automation,
and the ability to update the user interface on
existing panels without panel replacement
• Full interactive support of Honeywell Vista and DSC
Power Series panels
• Telco event capture and reporting on most legacy
panels using phone line emulation
Installation Overview
1. Set up an account in the AlulaConnect portal.
2. Program the panel to use the BAT-Connect. (Refer
to the programming section for your panel.)
3. Mount the BAT-Connect to a wall using the
mounting holes on the back plate.
4. Wire the panel to the BAT-Connect. (Refer to the
wiring diagram section for your panel.)
5. Set up the network communication path.
• Maximum cable length to the panel:
18 gauge wire = 350 feet
22 gauge wire = 130 feet
24 gauge wire = 75 feet
Wall Tamper Screw
(Do not overtighten mounting)
Mounting Screws
Cover Securing Screw
Tie Wrap
Holes
Wiring Breakouts
Connecting via ethernet:
Plug in cable and ensure ethernet LED is on.
Connecting via cellular:
Verify cellular LED is on and verify signal
strength. (See page 8 for signal strength.)

Alula BAT-Connect Specifications

General

Brand	Alula
Model	BAT-Connect
Category	Cell Phone
Language	English

Summary

Installation Overview

Honeywell Vista Programming

AUI 2 Configuration

Details regarding AUI2 configuration and potential conflicts.

RIS Support Status

Information on RIS status for Vista panels and required actions.

Keypad Lockout Settings

Configuration and implications of keypad lockout for Vista panels.

Honeywell Vista Wiring

DSC Power Series Programming

DSC Wiring

Generic Alarm Programming

Generic Alarm Panel Wiring

Operation

LED Indicators

Explanation of the meaning of various LED indicators on the device.

Cellular Signal Bar LEDs

Describes cellular signal strength based on LED indicators.

Pro Tips

Troubleshooting

Panel Bus LED Blinking

Steps to resolve panel bus LED blinking issues.

Network LED Flashing Slow

Troubleshooting steps for slow network LED indicators.

Ethernet LED Off

Steps to troubleshoot when the Ethernet LED is off.

Wi-Fi LED Off

Steps to troubleshoot when the Wi-Fi LED is off.

Cellular LED Off

Steps to troubleshoot when the Cellular LED is off.

Supervisory Trouble

Information and steps for supervisory trouble errors.

No CS Reports

Troubleshooting steps for missing central station reports.

Poor Cellular Signal

Steps to improve poor cellular signal strength.

Antenna Options

High Gain Antenna

Antenna Removal and Installation

Guide to removing and installing antennas on the device.

Other Cellular Antenna Options

Lists alternative cellular antenna models available.

Specifications

Physical Specifications

Details on the physical dimensions and weight.

Device Specifications

Information on reported indications and current draw.

Environmental Specifications

Details on operating temperature and humidity.

Model Information

Lists available BAT-Connect models.

Certification Details

Information on FCC and IC certifications.

FCC Notice

IC Notice