Alutech CU-TR400-868 - Default Chapter; Table of Contents

11CONTROL UNITS UTR230868 / UTR400868
ENGLISH
1. Safety rules and warnings
................................................2
1.1. General .................................................................... 2
1.2. During installation
............................................................ 2
1.3. During operation
............................................................. 3
2. Product description .....................................................4
2.1. Delivery kit .................................................................. 4
2.2.
Specications
................................................................ 5
3. Preparation for installation ...............................................5
4.
Installation
...........................................................6
5. Electrical connections ...................................................6
5.1. Network and electric drive connections ............................................. 6
5.2. Connection of switches / drive encoder
............................................. 7
5.3. Connection of additional devices
.................................................. 7
6. Settings ..............................................................9
6.1. Setting the end position of doors ................................................. 10
6.2.
Radio control setting
........................................................... 12
6.3. Setting operation parameters
.................................................... 19
6.4. Reset to factory settings
........................................................ 26
6.5. Cycle counter data
............................................................ 27
7. Inscription ........................................................... 28
8.
Verication of operation and commissioning
................................ 30
9. Maintenance service
................................................... 31
10. Malfunctions and recommendations for their elimination
....................... 32
11. Storage, transportation, disposal
.......................................... 34
12. Warranty obligations
................................................... 34
13. Commissioning certicate
............................................... 35
14.
Information on the performed works
....................................... 36
15. Information on repairs during warranty period
............................... 37
CONTENTS