What to do if my Alutech LG motor runs but the door doesn't move?
If the drive runs after a command but the door doesn't move, it's likely that the drive rail carriage is not blocked. Block the drive rail carriage to resolve this issue.
Why is the light flashing on my Alutech Garage Door Opener?
If the drive light flashes after a control command, it indicates an error in the operation of the drive. Check the error display on the drive and repair the drive according to the error description.
General| Operating Temperature | -20°C to +50°C |
|---|---|
| Warranty | 2 years |
| Power Supply | AC |
| Max. opening speed | 0.2 m/s |
| Drive Type | Chain |
| Remote Control | Yes |
| Safety Features | Obstacle detection |
Lists all items included in the drive set and drive rail kit.
Provides technical data for different drive models and rail types.
Step-by-step guide for installing the drive rail and the drive unit.
Explains how to manually release and operate the drive carriage.
Explains how to manually and automatically set the door's open and closed positions.
Details setting up and recording remote controls for the drive.
Explains how to delete individual or all recorded remote controls from the drive's memory.
Describes how to enter the settings menu and adjust operational parameters.
Explains how to restore the drive's settings to their default factory values.
To Next Page
