VI-4
PERIODIC MAINTENANCE
Every day
CLEANING
WARNING
O Be sure to stop the saw blade before
cleaning the machine. It is dangerous if
any part of your body is caught in the
running saw blade.
At the end of the day’s work, clean the machine.
Stop the saw blade, press the CUTTING FLUID button to discharge the
cutting fluid from the cleaning nozzle, and wash away the chips
deposited on various parts of the machine.
Carefully wipe off the vise and slide surfaces susceptible to rusting.
LUBRICATION
Check the slide surfaces,
and apply machine oil to
them before they are
rusted.
REAR VISE TABLE
SLIDE SURFACES
FRONT VISE TABLE
SLIDE SURFACES
To Next Page
Loading...
