EasyManuals Logo

Amana AVZC20 Series User Manual

Amana AVZC20 Series
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
SERVICING
26
12. Press Previous Menu button and navigate to
HOME screen and allow test to finish. The display
similar to the one at the right will be displayed
after SYSTEM TEST completes. Test is complete
only when CODE 11 notice clears from BOTH the
thermostat display AND the seven segment LED
display on the outdoor unit. Please wait for test to
complete and for both codes to clear.
SET THERMOSTAT TO CHARGE MODE
Please follow the following sequence to enter CHARGE MODE.
CHARGE MODE allows for charging of the system. System
operates for a duration of approximately one hour while the
equipment runs at full capacity. After one hour, the CHARGE
MODE ends and the system resumes normal thermostat op-
eration.
Before starting the CHARGE MODE, turn off the electric heater
and gas furnace.
1. On the HOME screen, select MENU.
NOTE: Ensure the thermostat is in the OFF mode.
Select
SYSTEM menu. Choose OFF before CHARGE MODE.
2. From the MENU screen, scroll down and select
COMFORTNET
TM
USER MENU.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Amana AVZC20 Series and is the answer not in the manual?

Amana AVZC20 Series Specifications

General IconGeneral
BrandAmana
ModelAVZC20 Series
CategoryHeat Pump
LanguageEnglish

Related product manuals