9
7. Press HEAT key to scroll to second unoccupied setback time. Press either the up or down arrow to
the desired second unoccupied setback time. Example: Operating set point would be 76
0
instead of 72, one hour (1.0
hour) after guest leaves room.
8. Press HEAT key to scroll to third unoccupied setback temperature. Press either the up or down arrow
to the desired third unoccupied setback temperature.
9. Press HEAT key to scroll to third unoccupied setback time. Press either the up or down arrow to the
desired third unoccupied setback time.
10..To exit configuration mode:
Press the OFF key. NOTE: Configuration feature mode will also automatically exit if no keys are pressed
for a period of two (2) minutes.
The changes made in configuration mode are now in effect.
NOTE: Additional codes are present and may be accessed within this menu. Contact the manufacturer for additional
information.
To Next Page
Loading...
