© Copyright 2014 Amano McGann, Inc. OPUS7000_Installation_10032014 29
OPUS-7000 Installation Manual
[Fig. 3.1A] The Applications Versions section shows the versions of Windows CE dll files
7. If the current versions are older than the required versions, please see
sections 4.1 Updating the Windows CE Image and 4.2 Updating the
SmartCash Firmware for updating instructions.
8. Press OK or X when finished.
9. Power OFF the device and flip dip switches 6-8 to the OFF position.
3.2 Device Binaries
Follow the instructions below to verify the device binary version.
1. Power ON the device.
2. Start the First Time Operation menu by toggling the Management Switch
located in front of the iCore board.
The Application Version: AMI Ver is displayed in the First Time Operation
menu. This is the Paystation’s binary version.
To Next Page
Loading...
