© Copyright 2014 Amano McGann, Inc. OPUS7000_Installation_10032014 35
OPUS-7000 Installation Manual
16. Change the host name to io1007000. Please keep a naming convention if
more than one 7000 Paystation exists on site. Save the name.
17. After saving the new host name, hover over the System tab and select User
Settings.
18. Select Choose File in the Import Settings section.
19. Select the .hdf file needed to be uploaded to the IO100 board.
20. Click Import.
21. The IO100 will upload the configuration file and ask to be reset when it is
finished. Click Reset Device to reset the board. Please wait for the “Reset
Successful” message before continuing.
22. Once the device has been reset, log into the IO100
23. Hover over the Network tab and click SSL.
24. In the Certificate Files section, click the Browse... button and navigate to the
certificates created in step ‘1’ of this section.
25. Select one of the three certificate files that were created. Click Upload and
wait for the upload to finish. Repeat steps 24 and 25 for the remaining two
files.
To Next Page
Loading...
