Amarex KRT series - General Information; Principles, Target Group, and Documents

1 General
6 of 124
Amarex KRT
1 General
1.1 Principles
This operating manual is supplied as an integral part of the type series and variant
indicated on the front cover (for details, please refer to the table below).
Table1: Variants covered by this manual
Size Impeller type Material variant
Gray cast iron Industrial materials
G G1 G2 GH H C1 C2
200-631 K K K - - - - -
250-630 K K K - - - - -
250-632 K K K - - - - -
250-900 K K K - - - - -
350-632 K K K - - - - -
350-633 K K K - - - - -
350-636 K K K - - - - -
350-710 K K K - - - - -
350-713 K K K - - - - -
400-900 K K K - - - - -
401-710 K K K - - - - -
401-713 K K K - - - - -
500-632 K K K - - - - -
500-634 K K K - - - - -
500-640 K K K - - - - -
501-710 K K K - - - - -
501-900 K K K - - - - -
600-710 K K K - - - - -
700-901 K K K - - - - -
700-902 K K K - - - - -
The manual describes the proper and safe use of this equipment in all phases of
operation.
The name plate indicates the type series and size, the main operating data, the order
number and the order item number. The order number and order item number
clearly identify the pump set and serve as identification for all further business
processes.
In the event of damage, immediately contact your nearest KSB Service center to
maintain the right to claim under warranty.
1.2 Target group
This supplementary operating manual is aimed at the target group of trained and
qualified specialist technical personnel.
1.3 Other applicable documents
Table2: Overview of other applicable documents
Document Contents
Data sheet Technical data of the pump set
General arrangement drawing/
outline drawing
Mating dimensions, installation dimensions
and weights of the pump set
Hydraulic characteristic curve Characteristic curves showing head, flow rate,
efficiency and power input