Also, instead of the word RGB, you can use its equals, LED, background, theme, environment
Set color of background to white
Environment color orchid
You can also use the
{dark / darker / lighter / bright}
color intensity before or below the color of the
{
colorname
} to reduce or increase the intensity of the color you want. Example :
Kitchen's rgb color to dark red
Change the color theme to bright green
RGB color lighter cyan
In addition, you can use% (
percent
) for the brightness after the color name {
colorname}
. Example:
Example:
Set color of
LED
to brown 33 percent
Change the color of Hall's background to gray 50 percent
Room's rgb color to pink 10 percent
RGB
color to black 70 percent = color of
RGB
to black 70 percent
Open Close command
This command is more for tools that work like a relay or curtain, such as doors, blinds, shutters, valves and
...
The key word for this command is
Open
and
Close
and its form is as follows:
Open/close {place.pos.device}
{place.pos.device} open/close
Example:
Open the door
Open the second valve of yard
The parking door, open
Close the bathroom faucet
Close pipe
Shutter close
Close the saloon's curtain
Notice that in models that use the relay for opening and closing (such as a door lock), the opening is
instantaneous, but in models that use the curtain switch (such as shutter and electric curtain) from
the moment the command is executed It will take a long time to complete colsing or opining fully, if
necessary to stop the opening or closing process by issuing the stop command (described in this
manual).
Stop
To Next Page
Loading...
Need help?
General
