No: The number applied to the proxy in the system.
Server IP Address: Enter the IP address of the server being used.
Port: The port number used when setting up the proxy address.
ID: The ID number that is applicable to the proxy address.
Click the Refresh button to refresh the interface. To confirm settings, click the Save button.
Switch
The Switch menu is used to automatically allocate the IP address according to the specified IP segment.
The network camera can automatically register to the NVR. It is for you to set IP address, subnet mask,
gateway etc. of the switch.
Note: This function is for PoE products only. Do not connect a physical switch to the PoE ports of the NVR
as it may cause damage to the unit. The Switch function of the NVR is enabled by default. The IP segment
is 10.1.1.1. Usually, we recommend using just the default setup method.
IP Address: The default IP segment of the device.
Subnet Mask: The current default subnet mask of the device.
Default Gateway: The current default gateway of the device.
Click the Refresh button to refresh the interface. To confirm settings, click the Save button.
P2P
The P2P screen allows users to access a QR code to connect their smartphone or tablet to the NVR. The
device uses an app called Amcrest View Pro, and it is available on both iOS and Android.
Enable: This checkbox allows the user to enable the P2P feature for the NVR.
Status: This field shows the status of the P2P connection. Once connected using the app, this field
should display the word Online.
Cell Phone Client: This is the unique QR code is used as a quick reference point for downloading the
Amcrest View Pro app onto your mobile device.
Device SN: This is the unique QR Code associated with your NVR’s serial number. Use this as a quick
reference point when setting up your NVR on the Amcrest View Pro app.
Click the Refresh button to refresh the interface. To confirm settings, click the Save button.
Amcrest View Pro Setup
The Amcrest View Pro app allows instant access to all live camera streams from any location. The app
supports a multitude of features and includes both a plug-and-play setup as well as a manual network
setup. Please note, AI features provided by the NVR can only be modified using the local or web UI
and cannot be adjusted using the Amcrest View Pro app.
To Next Page
Loading...
Need help?
General
