Amcrest A2 User Manual

56
Face Detection
Face detection is used to allow your device to detect face events. Please note, this feature may differ
depending on which model camera is being used on the NVR. Not all AI cameras support this feature.
For more information on setting up face detection, please refer to the information provided below.
1: Access the Smart Plan menu and select the channel you would like to configure from the Channel drop
down menu. Click on the Face Detection icon and then click Save. If using a non-AI camera, a smart plan
may not be available for the specific channel.
2. Click on the Face Detection option located in the Parameters section and select which channel to
configure from the Channel drop down menu and enable the face detection toggle switch. Click Save.
3. It is best to leave the Rule settings as default, however, they can be adjusted by clicking on the Setting
button. Use your mouse to adjust the minimum (Min) and maximum (Max) size of the face detection area.

Amcrest A2 Specifications

General

Brand	Amcrest
Model	A2
Category	DVR
Language	English