AMD Xilinx ZCU670 - Default Jumper and Switch Settings

Table 2: ZCU670 Board Component Locations (cont'd)
Callout
Ref.
Des.
Feature
[B]=Bottom
Notes
Schematic
Page
48 U118 DAC AVTT regulator [B] MPS MPM3833C 55
Default Jumper and Switch Settings
The following gure shows the ZCU670 board jumper header and switch locaons. Each
numbered component shown in the gure is keyed to the applicable table in this secon. Both
tables reference the respecve schemac page numbers.
Chapter 2: Board Setup and Configuration
UG1532 (v1.0) March 30, 2022 www.xilinx.com
ZCU670 Board User Guide 14
Send Feedback