Ameri-King AK-451 Series User Manual (English)

Need help?

Do you have a question about the Ameri-King AK-451 Series and is the answer not in the manual?

Ameri-King AK-451 Series Specifications

General

Operating Temperature	-20°C to +55°C
Frequency Range	118.000 to 136.975 MHz
Channel Spacing	25 kHz
Modulation	AM
Channels	760

Summary

Installation and Operation Manual

Section II Installation and Test

2.2 Mechanical Installation

Covers installation of ELT main unit, antennas, remote unit, and wiring.

2.4 Post Installation Test

Procedures for performing quick operation check, detail operation check, and self-test.

2.5 Battery Installation and Replacement

Detailed instructions for installing and replacing batteries in the main and remote units.

Section III Operation

3.2 Operation

3.3 Transmitter Functional Test

Procedures for quick operation check, switch operations, self-test, and system integration.

3.4 Periodic Maintenance

Annual inspections including secure, corrosion, battery checks, and operational tests.

3.5 Periodic Maintenance (Canadian Installation)

Maintenance requirements specific to Canadian installations, including performance testing.

Section IV Registration and Responsible Use

4.1 Registration

Importance, methods, and requirements for registering 406 MHz ELTs.

4.2 Responsibility

Guidelines for responsible use and preventing false alarms.

Appendix A.1 Quick Operation Check

Appendix B Periodic Maintenance Check List with Compliance Cross References

Appendix C Emergency Locator Transmitter Recommended Supplemental Inspection Procedure

Appendix F Registering a 406 MHz Beacon in the U.S.A.

Appendix H ELT Coding Programming, ID Reader and Maintenance Test, P/N TS-451

2. ELT Coding Programming

Procedure for programming the ELT's ID using the AK451 software.

2.5 To program ELT: Use command “ 06 “

Instructions for programming the ELT with 22 or 30 Hex Digit ID.

3. ELT Maintenance Self-Test:

4. Functional Test, GPS Position Coordinates Simulation:

FAA Authorization Letter

TSO Authorization

EASA Authorization

Japan Civil Aviation Board Approval

Appendix K Material Safety Data Sheet for Battery

Section 3. Hazards Identification

Identifies emergency hazards, health effects, and exposure routes of the battery.

Section 4. First Aid Measures

Section 5. Fire Fighting Measures

Section 6. Accidental Release Measures

Section 7. Handling and Storage

Section 10. Stability And Reactivity

Section 13. Disposal Considerations

Section 14. Transport Information

Safety Precautions for Lithium-Manganese Dioxide (Li-MnO2) Cells and Batteries

A. General

B. Handling

C. Installation

D. Use of the Battery

Safety Warnings for Lithium-Manganese Dioxide (Li-MnO2) Cells and Batteries

A. When Using the Battery

WARNINGs regarding hot, explosion, or ignition risks when using batteries.

B. When Discharging the Battery

WARNINGs regarding battery damage or reduced life expectancy when discharging.

Ameri-King AK-451 Series User Manual

Table of Contents