Need help?Do you have a question about the American Audio VMS2 and is the answer not in the manual?
Provides contact information and support channels for setup assistance and operational questions.
Specifies environmental conditions and user qualifications necessary for optimal and safe device operation.
Specifies the minimum PC hardware and operating system requirements for VMS2™ compatibility.
Lists the minimum Mac hardware and operating system requirements for VMS2™ compatibility.
Lists the items that should be included in the VMS2™ package for proper operation.
Provides instructions on how and where to physically place or mount the VMS2™ unit for optimal performance.
Details the proper procedure for connecting the VMS2™ to audio outputs and power sources.
Describes the functions and operations of the controls located on the front panel of the VMS2™ player.
Details the configuration for the 4-output mode of the VMS2™ audio interface.
Provides step-by-step instructions for connecting the VMS2™ controller to a PC using a USB cable.
Details the procedure for removing and installing a new crossfader assembly for the VMS2™ mixer.
General| Channels | 2 |
|---|---|
| USB Interface | Yes |
| Audio Resolution | 24-bit |
| Sampling Rate | 48kHz |
| Dimensions | 12.6 x 10.3 x 3.5 inches |
| Weight | 4.4 lbs |
| MIDI Control | Yes |
| Crossfader | Yes |
| Microphone Input | Yes |
| Inputs | 2 x RCA |
| Outputs | 2 (RCA) |
| EQ | 3-band per channel |
To Next Page
