American Dynamics Intellex Installation And Configuration Guide

Intellex IP
64 Intellex®
1 For information on setting up and installing Intellex IP, see the Intellex IP Quick Setup Guide.
2 Follow the prompts and enter information as for the standard Ultra 4.1 application.
3 From the main screen, select Setup. The Setup Options screen appears.
4 Configure the IP device according to the manufacturer’s instructions before adding it to the
Intellex IP application. This includes:
• Assigning an IP address or device name;
• Ensuring that video can be viewed using the device manufacturer’s viewer.
To configure a VideoEdge™ IP Encoder refer to Adding a VideoEdge™ IP Encoder on
page 67.
Green light indicates the unit has power, but you
must press the power button to start Intellex IP
IP Sources button
replaces Cameras
button on standard
Intellex
Select to open the
IP Sources dialog

American Dynamics Intellex Specifications

General

Brand	American Dynamics
Model	Intellex
Category	Software
Language	English