To Next PageTo Next Page
Need help?Do you have a question about the American Standard TAM9A0C36V31DA and is the answer not in the manual?
General| Model | TAM9A0C36V31DA |
|---|---|
| Product Type | Air Handler |
| Brand | American Standard |
| Series | TAM9 |
| Cooling Capacity | 3 tons |
| HSPF Rating | Up to 10 HSPF |
| Blower Type | Variable Speed |
| Voltage | 208/230 V |
| Phase | 1 |
| Motor Type | ECM |
| Heating Capacity | 36000 BTU |
| Width | 21 inches |
Warning about property damage or severe personal injury or death due to hazardous voltage.
Caution regarding proper inspection and use of grounding devices to prevent equipment damage or injury.
Warning about hazards when working with live electrical components during installation or servicing.
Warning of personal injury risk from pressurized refrigerant and oil in the system.
Table of vapor and liquid line connection sizes and diagram of the refrigerant system layout.
Steps for removing panels, plugs, and protecting heat-sensitive sensors before brazing.
Procedure for connecting and brazing refrigerant lines, including pressure testing and leak checking.
Requirements for condensate drain plumbing, including material compliance, slope, and connections.
Guidelines for high voltage power supply, compliance with codes, and wiring diagrams for electric heaters.
Steps for routing high voltage wiring, selecting conduit entry points, and connecting wiring.
Steps for ensuring panels are secure, setting the thermostat, and applying power to the unit.
Operation sequences for continuous fan mode, humidity control, and cooling modes, including EVC control.
Operation sequences for heat pump, electric heat, and hydronic heat modes, including defrost and freeze protection.
Methods for accessing active/historical faults and procedures for clearing the fault history.
A comprehensive checklist of procedures to confirm before final system operation.
