American Standard TAM9A0C48V41DA User Manual

SSAAFFEETTYYWWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
April 2020
1188--GGJJ8822DD11--11EE--EENN
Variable Speed Air Handlers
Convertible 2 — 5 Ton
TAM9A0A24V21DA
TAM9A0B30V31DA
TAM9A0C36V31DA
TAM9A0C42V41DA
TAM9A0C48V41DA
TAM9A0C60V51DA
NNoottee:: “Graphics in this document are for representation
only. Actual model may differ in appearance.”
NNoottee:: For use with BAYEA series heaters ONLY
Installer’s Guide

American Standard TAM9A0C48V41DA Specifications

General

Model Number	TAM9A0C48V41DA
Category	Air Handlers
Brand	American Standard
Nominal Capacity (Tons)	4
Cooling Capacity	48000 BTU/H
Refrigerant	R-410A
Voltage	208/230V
Phase	1
Depth	21 inches

Summary

Safety Information

Air Handler Safety Warnings

Essential safety precautions for installation and servicing, covering electrical, refrigerant, and physical hazards.

Installation and Setup

Installer Notes, Unit Design, and Preparation

Key installation notes, unit design features, cabinet access, and panel removal.

Unit Placement and Duct Connection

Steps for unit preparation, placement, orientation, and duct connection.

System Components, Operation, and Checkout

Refrigerant, Electrical, and Drainage Systems

Information on refrigerant lines, brazing, condensate drains, and electrical wiring.

Unit Operation and Controls

Outline drawing, display interface, technician menus, start-up, and sequence of operation.

Maintenance and Checkout Procedures

Filter considerations, fault reporting, and final system checkout.