American Standard TMM4A0A18S21SAA User Manual

WALL-MOUNT AIR HANDLERS
1.5-3TON COOLING/HEAT PUMP
(Limited heat pump combinations. See AHRI for details.)
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
Important: This Document is customer property and is to remain with this unit.
Installer’s Guide
Section 1. Features
1.1 Standard Features
The TMM4A series wall mount air handler is designed for installation in a closet, utility room, alcove
and can be wall mounted. These versatile units are applicable to air conditioning applications. Field
installed electric resistance heaters are available.
18-GF07D1-2
• FRONT OR BOTTOM RETURN AIR.
• PAINTED FINISH ON GALVANIZED STEEL
• STURDY POLYCARBONATE DRAIN PANS
- The TMM4A wall mount air handler has factory
installed drain pans and is shipped for upflow
applications only.
•
208/230 VAC OPERATION
1.2 Optional Accessories
•
5, 7.5 and 10 kW SINGLE PHASE ELECTRIC
HEATERS
- Circuit breakers are standard on all single
phase 5, 7.5 and 10 kW heaters.
•
STUD OR WALL MOUNTING TABS
•
FULLY INSULATED CABINET
•
3/4'' NPT PRIMARY AND SECONDARY DRAINS
TMM4A0A18S21SAA
TMM4A0A24S21SAA
TMM4A0B30S21SAA
TMM4A0B36S31SAA

American Standard TMM4A0A18S21SAA Specifications

General

Model Number	TMM4A0A18S21SAA
Product Type	Air Handler
Cooling Capacity	1.5 Ton
Voltage	208/230 V
Phase	1
Refrigerant	R-410A
Airflow	600 CFM
Motor Type	PSC
Depth	21 inches
Cabinet Type	Multi-Position
Filter Type	Standard