Ametek 7270 - Page 190

Appendix D, DEFAULT SETTINGS
D-2
Output Offset & Expand
Offset Status Off
Output Expand Off
Output Equations
Equation #1 ((X-X)  X)/X = zero
Equation #2 ((X-X)  X)/X = zero
Equns 1 & 2 C1, C2 0
Frequency Sweep
Start Frequency 0.000 Hz
Stop Frequency 0.000 Hz
Step Size 0.000 Hz
Time/Step 0.000 s
Armed No
Law Logarithmic
Amplitude Sweep
Start Amplitude 0.000 V
Stop Amplitude 0.000 V
Step Size 0.000 V
Time/Step 0.000 s
Armed No
Configuration
Operating mode Single Reference
Display screen Turned on
Noise Measurement Mode OFF
Noise Buffer Length 4 seconds
Curve Buffer
Curve Mode Standard
Time/Point e 10 ms
Length 100,000
Curve Start Trigger Internal
Curve Stop Trigger Internal
Curve Select
Selected curve X
ADC Menu
ADC Trigger Mode Internal
Time Per Point 1 ms
DAC Menu
USER DAC1 - USER DAC 4 0.000 V
DAC1 SETUP X%
DAC2 SETUP Y%
DAC3 SETUP USER DAC 3
DAC4 SETUP USER DAC 4
Digital Port
D0 to D7 direction All configured as outputs
D0 to D7 status Logic zero