M21-400 REV.1.1 DVPLUS DIGITAL VISCOMETER - OPERATIONAL MANUAL
Figure 2-5.6 Figure 2-5.7
The DVPlus requires a Spindle Entry Code number to calculate viscosity values. The two-digit code for each spindle
can be found in Appendix D.
Pressing the Spindle field on the Configure Viscosity Test screen will present the Set Spindle screen. Spindle Codes
can be entered using a digital numeric keypad or a scrollable spindle list.
Figure 2-5.8
If using the keypad, delete any unwanted values in the entry box by pressing the clear data radio button .
Enter the Spindle Code you want in the entry box and press Confirm. The display will return to the Configure
Viscosity Test screen.
To Next Page
Loading...
