Ametek JOFRA ATC-125 Service Manual

122770 06 18-09-2007 5
1.0 General
1.1 Introduction
This service manual applies to the following instruments:
• JOFRA ATC-125 A/B
• JOFRA ATC-140 A/B
• JOFRA ATC-155 A/B
• JOFRA ATC-156 A/B
• JOFRA ATC-157 A/B
• JOFRA ATC-250 A/B
• JOFRA ATC-320 A/B
• JOFRA ATC-650 A/B
All calibrators are produced from quality components by skilled staff.
Each calibrator passes several tests during assembly. It undergoes a
final inspection and test, followed by a special calibration procedure
laid down by our technical staff.
Caution…
If you decide to check and/or re-calibrate the calibrator, you
must always use certified test equipment only and ensure
proper contact between the test probe and the well of the
calibrator.
Operating guidelines and technical specifications are outlined in
reference manual order no. 105446. Please note that this is only
available in English.

Ametek JOFRA ATC-125 Specifications

General

Brand	Ametek
Model	JOFRA ATC-125
Category	Measuring Instruments
Language	English