103887 01 1
LIST OF CONTENTS
1. INTRODUCTION
1.1 PACKING LIST ...............................................................................2
2. SAFETY INSTRUCTIONS....................................................2
3. OPERATION ........................................................................4
3.1 DISPLAY AND KEYBOARD...........................................................4
3.2 SWITCHING THE MACAL ON/OFF .................................................6
3.3 HOW THE CURRENT IS GENERATED.........................................6
3.4 HOW THE CURRENT IS MEASURED...........................................7
3.5 HOW THE VOLTAGE IS MEASURED...........................................7
3.6 HOW NEW PARAMETERS ARE SELECTED (SETUP)...............8
3.6.1 SELECTION OF MODE...........................................................8
3.6.2
SELECTION OF SLOPE TIME................................................8
3.6.3 SELECTION OF STEP SIZE...................................................9
3.6.4 SELECTION OF STEP TIME ..................................................9
3.6.5 SELECTION OR DE-SELECTION OF AUTOMATIC OFF FUNCTION 9
4. ERROR SITUATIONS........................................................10
4.1 TEST FOR “OPEN LOOP”...........................................................10
4.2 TEST FOR INCORRECT POLARITY...........................................10
4.3 TEST FOR “OVERRANGE”.........................................................10
4.4 INDICATION OF BATTERY STATUS..........................................11
5. HOW mAcal IS ADJUSTED (service mode) ....................12
6. TECHNICAL SPECIFICATIONS (23°C±3°C)....................14
To Next Page
Loading...
